The #1 Site for Internships and Entry Level Jobs - search all Internships and Entry Level jobs.
M445yq681gx8pvb13jf

Fabricator (Welder)

Job Description


FABRICATOR (WELDER)

EXPERIENCE IN PRODUCTION WELDING OR CERTIFICATE IN WELDING REQUIRED

SUCCESSFUL COMPLETION OF WELDING TEST AS PART OF INTERVIEW

1st Shift Start Pay: $15.50/hour

2nd Shift Start Pay: $16.82/hour

ESSENTIAL FUNCTIONS (other duties may be assigned):

  1. Perform job duties safely to conform to our safety program

  2. Reference blueprint and confer with Lead person to determine job requirements

  3. Gather necessary materials and perform layout per specifications

  4. Set up welding machine and adjust settings

  5. Position, clamp, and/or tack weld as needed before beginning welding process

  6. Operate welding gun to weld steel, aluminum, or copper pieces together

  7. Visually examine welds for adherence to quality standards; re-weld defective joints and remove surplus slag, flux, and spatter using a brush, pad, buffer, and/or grinder

  8. Operate cutting torch and manual plasma cutter as needed

  9. Notify Lead person or Inspector when product is ready for inspection

  10. Perform ongoing housekeeping duties to keep work area clear of scrap and debris

SUPERVISORY RESPONSIBILITIES (list below, if applicable):

None

QUALIFICATIONS:

  1. Equipment Used: Welding machine, cutting torch, manual plasma cutter, brush, pad, buffer, grinder, overhead crane, ratchet straps, rubber hammer, tape measure

  2. Certificates, licenses, and registrations: Must have or achieve welding certification. Ability to obtain and maintain fork truck license if required.

  3. Knowledge/Skills: Able to read tape measure and blueprints. Able to properly operate welding equipment. Must be trained in applicable SOPs (Standard Operating Procedures) and work instructions, if any.

  4. Education/Experience: At least 1 year of welding experience or training. High school diploma or equivalency (GED) preferred, but not required

  5. Language Skills: Able to read and comprehend simple or somewhat complex instructions. Able to write notes or simple correspondence. Able to effectively communicate information to coworkers.

  6. Mathematical Skills: Able to perform simple addition, subtraction, multiplication, and division calculations using whole numbers as well as decimals/fractions. Able to calculate and interpret common tape measurements.

  7. Reasoning Ability: Able to apply common sense understanding to carry out multiple-step instructions of moderate complexity. Able to deal with standardized situations with a limited set of variables.

  8. Attendance Requirement: Requires regular attendance during scheduled shift and overtime as required.

  9. Travel Requirement: None

  10. Physical Demands: Manufacturing position; spends more than 2/3 of time standing, kneeling/crouching/stooping, using hands, and reaching. Spends app. 1/3 of time walking and talking/hearing. Spends less than 1/3 of time positioning items weighing up to 250 lbs. (Lifting and moving of heavier items is achieved via overhead cranes and forklifts). Generally requires clear vision at close distances (for reading prints/instructions and marking reference points

  11. Work Environment: Industrial manufacturing environment with loud noise level. Facility is enclosed and is ventilated and heated, but is not air-conditioned. Smoke from welding processes is removed by direct airflow from fans. More than 2/3 of time is spent near moving mechanical parts, in heat/humidity. Steel toe shoes, safety eyewear, and hearing protection required. Gloves, face-shield, welding helmet, and other PPE as needed. Contact lenses are not permitted.

Job Requirements

 

Job Snapshot

Location US-MO-Fulton
Employment Type Full-Time Employee
Pay Type Year
Pay Rate N/A
Store Type Other
Apply

Company Overview

AZZ Inc.

AZZ Inc. provides hot dip galvanizing to the steel fabrication industry through facilities located throughout North America. As North America’s largest galvanizer, our vast network of facilities adequately positions us to serve a variety of industries and applications. Hot-dip galvanizing is a metallurgical process in which molten zinc is applied to a customer's material. The zinc bonding renders corrosion protection to fabricated steel for extended periods of up to 50 years.. Learn More

Contact Information

US-MO-Fulton
Snapshot
AZZ Inc.
Company:
US-MO-Fulton
Location:
Full-Time Employee
Employment Type:
Year
Pay Type:
N/A
Pay Rate:
Other
Store Type:

Job Description


FABRICATOR (WELDER)

EXPERIENCE IN PRODUCTION WELDING OR CERTIFICATE IN WELDING REQUIRED

SUCCESSFUL COMPLETION OF WELDING TEST AS PART OF INTERVIEW

1st Shift Start Pay: $15.50/hour

2nd Shift Start Pay: $16.82/hour

ESSENTIAL FUNCTIONS (other duties may be assigned):

  1. Perform job duties safely to conform to our safety program

  2. Reference blueprint and confer with Lead person to determine job requirements

  3. Gather necessary materials and perform layout per specifications

  4. Set up welding machine and adjust settings

  5. Position, clamp, and/or tack weld as needed before beginning welding process

  6. Operate welding gun to weld steel, aluminum, or copper pieces together

  7. Visually examine welds for adherence to quality standards; re-weld defective joints and remove surplus slag, flux, and spatter using a brush, pad, buffer, and/or grinder

  8. Operate cutting torch and manual plasma cutter as needed

  9. Notify Lead person or Inspector when product is ready for inspection

  10. Perform ongoing housekeeping duties to keep work area clear of scrap and debris

SUPERVISORY RESPONSIBILITIES (list below, if applicable):

None

QUALIFICATIONS:

  1. Equipment Used: Welding machine, cutting torch, manual plasma cutter, brush, pad, buffer, grinder, overhead crane, ratchet straps, rubber hammer, tape measure

  2. Certificates, licenses, and registrations: Must have or achieve welding certification. Ability to obtain and maintain fork truck license if required.

  3. Knowledge/Skills: Able to read tape measure and blueprints. Able to properly operate welding equipment. Must be trained in applicable SOPs (Standard Operating Procedures) and work instructions, if any.

  4. Education/Experience: At least 1 year of welding experience or training. High school diploma or equivalency (GED) preferred, but not required

  5. Language Skills: Able to read and comprehend simple or somewhat complex instructions. Able to write notes or simple correspondence. Able to effectively communicate information to coworkers.

  6. Mathematical Skills: Able to perform simple addition, subtraction, multiplication, and division calculations using whole numbers as well as decimals/fractions. Able to calculate and interpret common tape measurements.

  7. Reasoning Ability: Able to apply common sense understanding to carry out multiple-step instructions of moderate complexity. Able to deal with standardized situations with a limited set of variables.

  8. Attendance Requirement: Requires regular attendance during scheduled shift and overtime as required.

  9. Travel Requirement: None

  10. Physical Demands: Manufacturing position; spends more than 2/3 of time standing, kneeling/crouching/stooping, using hands, and reaching. Spends app. 1/3 of time walking and talking/hearing. Spends less than 1/3 of time positioning items weighing up to 250 lbs. (Lifting and moving of heavier items is achieved via overhead cranes and forklifts). Generally requires clear vision at close distances (for reading prints/instructions and marking reference points

  11. Work Environment: Industrial manufacturing environment with loud noise level. Facility is enclosed and is ventilated and heated, but is not air-conditioned. Smoke from welding processes is removed by direct airflow from fans. More than 2/3 of time is spent near moving mechanical parts, in heat/humidity. Steel toe shoes, safety eyewear, and hearing protection required. Gloves, face-shield, welding helmet, and other PPE as needed. Contact lenses are not permitted.

Job Requirements

 
Mxj48l6fplr81r6064x
CareerRookie Advice

For your privacy and protection, when applying to a job online: Never give your social security number to a prospective employer, provide credit card or bank account information, or perform any sort of monetary transaction.Learn More

By applying to a job using careerrookie.com you are agreeing to comply with and be subject to the workinretail.com Terms and Conditions for use of our website. To use our website, you must agree with theTerms & Conditionsand both meet and comply with their provisions.
Fabricator (Welder) Apply now